Series number and name

Capability

Intended use

Interface
adhesive

SUCUI-5101
Emulsion Interface Coating

1.Enhance adhesive between subsequent and preceding coat.
2.Avoid subsequent coat burst
3.Resistant to water and infiltrating.

Special suitable for badly pulverized metope and floor, as well as new metope to be maintained.

SUCUI-5103
Heart Preservation Board Interface Coating

1.Strong binding force to XPS
2.Good adhesive to subsequence coat
3.Excellent resistance to cutting
4.Strong intension against pull and break

Suitable for outer wall system used heat preservation board, especially XPS.

SUCUI-5111
Concrete Mortar Interface Coating

1.Enhancing binding force between cement mortar and wall(such as concrete, brick, cyclostyle wall and etc.), forms “bridging action”
2.Avoid cement mortar leveling blanket busted and economize manpower and machine gigging cost.

Special used for interface gigging disposal of concrete prefabricate board,cast - in - site concrete prefabricate board, fight configuration, shearing force metope, brick and etc.

SUCUI-5211
Polymer Modify Adhesive

1.Special designed for polystyrene heat preservation board（EPS） and extrusion molding board（XPS）.
2.Excellent adhesion, plasticity and flexibility
3.Excellent resistance to water
4.Weathering and ageing resistance

Used to felt EPS with XPS（SUCUI-5103 special interface is necessary to enhance adhesive），as well as different flexible material such as mine rock cotton board , EPS/XPS decoration line and etc. It can be plastered on the surface of manifold basic material such as concrete, cement mortar, brick and stone built wall, adobe wall and etc.

SUCUI-5201
Polymer Modify Adhesive（None
Cement Basic Mortar）

1.Special designed for EPS and XPS.
2.Excellent adhesion
3.High temper
4.Weathering resistance
5.Easy application

Used to felt EPS with XPS（SUCUI-5103 special interface is necessary to enhance adhesive），as well as different flexible material such as mine rock cotton board, EPS/XPS decoration line and etc. It can be plastered on the surface of manifold basic material such as concrete, cement mortar, brick and stone built wall, adobe wall and etc.

Heat Preservation Mortar

SUCUI-5311
Polymer Grain Heat Preservation Mortar

1.Strong intension against pull and break
2.Resistant to fire
3.Resistant to heat
4.Low consistency and light material

SUCUI-5201polymer grain heat preservation is mainly consisting of polymer and complex silicate. Use polystyrene as “bone” and fill with especial modify material through complex by manifold deep techniques such as refined, pervasion and expand, mix, adhibit and etc. Fix to ETIRS system.

Anti-crack Mortar

SUCUI-5411
Polymer Anti-crack Mortar

1.Excellent adhesion, plasticity and flexibility, avoid wall crack
2.Excellent resistance to water
3.Match most kinds facing subsequent coats
4.Aging resistance

Suitable for leveling and protection of some kinds of light heat preservation materials such as EPS, XPS, mine rock cotton board, EPS/XPS decoration line and etc.

SUCUI-5401
Polymer Float Coat Mortar
(None Cement Basic)

1.Excellent adhesion, plasticity and flexibility, avoid wall crack
2.Excellent resistance to water
3.Avoid

Suitable for leveling and protection of some kinds of light heat preservation materials such as EPS, XPS, mine rock cotton board, EPS/XPS decoration line and etc.

SUCUI-5413
Polymer Float Coat Mortar(Two components)）

1.Excellent adhesion
2.Excellent resistance to crack
3.Excellent resistance to water
4.Match most kinds facing subsequent coats

Suitable for leveling and protection of some kinds of light heat preservation materials such as EPS, XPS, mine rock cotton board, EPS/XPS decoration line and etc.

Gridding Fabric

omit

EPS

omit

XPS

omit